THOMSON 512323 Manual De Instrucciones página 46

d - CONFigurATiON
1 Compatible cameras detected on the
recorder's network
2 IP address of the camera you wish to add
(auto-fills if you click on one of the cameras
detected above)
3 Name you want to give the camera being
added
4 Position of the name in the image
5 Camera connection port (auto-fills
if you click on one of the cameras detected
above)
6 Communication protocol:
• select 'Propriétaire' [Owner] for cameras
in the Thomson digital recorder range
512320 to 512322, 512358 and 512359
• select ONVIF for all other compatible
cameras
• (auto-fills if you click on one of the cameras
detected above)
7 Camera username (see note below)
8 Camera password (see note below)
9 Channel you would like to assign to the
camera being added
10 Cameras already added to the recorder
11 Click 'Recherche' [Search] to update the
list of detected cameras and already added
cameras
12 Click 'Ajout' [Add] to add the camera
you have selected
13 If you select a camera that has already been
added to the recorder, the 'Effacer' [Delete]
button allows you to remove it.
Important notes:
• The camera's username and the password
are those you use normally for your specific
application (for example, for Thomson IP cameras
with references 512390 to 512393: Thomview).
18
EN
Plug and Play 16 channel colour
network Video recorder
Range and Default user-
references name
Range of Thom- admin
son IP cameras
512390 / 512391
/ 512392
/512393
Range of admin
Thomson NVR
cameras *
512320 / 512321
/ 512322 /
512358 / 512359
Other ONVIF See user manual for camera
cameras being used
*this information is recognised and input
automatically by your digital video recorder's quick
configuration assistant.
• ONVIF cameras can be used with your digital
video recorder but we cannot guarantee total
compatibility (motion detection, motor control for
models equipped with motors, etc.)
• The 'automatic mode' in the Switch menu pairs
the cameras plugged into ports "LAN1" to
"LAN16". To pair cameras not connected to
these ports, you must select 'manual mode' in
the Switch menu.
Default pass-
word
There is no
default pass-
word
admin