Installation Of The Water Pipe 6.1 Installation Of The Water Pipe - Blaupunkt 5SB890SE0 Instrucciones De Uso

Step 1
Step 3
LOCK
3.
Mounting and fixing the filter (Fig. 2)
1)
Attach the two plastic clips to the wall with screws.
2)
Insert the filter into the clips.
3)
Mount the quick connector at one inlet of the filter and insert the water supply into another
end of the quick connector. Lock the connection with the circlip.
4)
Mount the quick connector and the water pipe at the outlet of the filter in the same way.
5)
After installation, check the figure on the right.
NOTE
If you have not used the chilled water function for some time, please remove several cups of
water and pour them away (residual water in the water tank) before using the function again.
Step 2
Step 4
45
Fig.
2
.