Franke FMW 20 SMP G XS Manual De Instalación Y Servicio página 14

INSTALLATION
1.The appliance can be installed in a 60cm wide wall-
mounted cupboard.
2.The appliance is supplied with a power cable and a
Schuko plug or a three-pole power cable with free
terminals.
3.The appliance must only be connected to a properly
installed earthed socket.
4.The mains voltage must correspond to the voltage
specified on the rating plate.
5.The socket must be installed and connecting cable must
only be replaced by a qualified electrician. If the plug is no
longer to accessible following installation, an all-pole
disconnecting device must be present on the installation
side with a contact gap of at least 3mm.
6.Adapters, multi-way strips and extension leads must not
be used. Overloading can result in a risk of fire.
The accessible surface may
be hot during operation.
EN-13