Franke FMW 20 SMP G XS Manual De Instalación Y Servicio página 4

CAUTION: In order to avoid a hazard due to inadvertent
resetting of the thermal cut-out, this appliance must not be
supplied through an external switching device, such as a
timer, or connected to a circuit that is regularly switched on
and off by the utility.
Ensure that the device is installed in a way that allows to
disconnect it from the power supply, with a contact opening
distance that ensures complete disconnection in category III
overvoltage conditions. Means for disconnection must be
incorporated in the fixed wiring in accordance with the
wiring rules.
Only use the temperature probe recommended for this
oven.
The appliance shall not be installed behind a decorative
door in order to avoid overheating.
WARNING: Risk of burns!
During use the appliance becomes hot. Care should be
taken to avoid touching heating elements inside the oven.
Children less than 8 years of age shall be kept away unless
continuously supervised.
Risk of burns!
The end of the door handle may be hotter due to hot air
being vented.
Always make sure that the control knobs are in the off
position when the oven is not in use.
WARNING: Ensure that the appliance is switched off before
replacing the lamp to avoid the possibility of electric shock.
EN-3