Using The Cooktop; Touch Control - FRIONOR H05V2V2-F Manual De Instalacion Y Uso

USING THE COOKTOP

The appliance is operated using the control
panel sensor keys.
Functions are controlled by touching the
sensor keys and confirmed by displays and
acoustic signals. Touch the sensor keys
from above, without covering other sensor
keys.

• TOUCH CONTROL

F
D
G
B C
A. On/Off key
B. Zone Selection key
C. Cooking zone Display
D. Minus [-] key
E. Plus [+] key
F. Timer display
G. LED indicator
• Switching the appliance on
Press the Power key to switch the
appliance on.
All the displays relative to the cooking zones
switch on in the standby position"0".
The control unit remains active for 20
seconds. If no cooking zone is selected
within this time, the appliance switches off
automatically.
• Switching the appliance off
To turn off the appliance entirely hold down
the power key.
• Switching the cooking zones on
To switch on a cooking zone press the
corresponding Cooking Zone key then
adjust the heat setting using the [+] key and
[-] Key within 10 seconds. The heat level of
each single cooking zone can be set in 9
F
E
A C B
different positions and will be shown in the
corresponding cooking zone display with a
number ranging from ''1'' to ''9''. Press the
[+] key to increase the heat level, press the
[-] key to decrease it.
• Switching the cooking zones off
To switch a cooking zone off select it and
bring its heat level back to ''0'' by pressing
the [-] key.
• Pot detection
Each induction cooking zone has a pot
detection minimum limit, which
varies according to the material of the
cookware being used.
For this reason, you should choose the
cooking zone which is most suitable for the
diameter of the cookware you are going to
use.
If the symbol
zone display, it means that:
• The cookware used is not suitable for
induction cooking.
• The cookware diameter is smaller than the
one allowed by the hob.
• No cookware is on the cooking zone.
For more details about this feature refer to
chapter ''Induction cooking" .
• Residual heat
If the temperature of the cooking zone is still
high (over 50°) after it has been switched off,
the relative display will indicate the symbol
''H''(residual heat).
The symbol will stay on even when the
appliance is switched off and will only switch
off when the burn risk in no longer present.
• Power Boost
The use of this function is recommended for
heating large quantities of liquids (e.g. water
to cook pasta) or food in a very short time.
This program further reduces the cooking
time of a certain cooking zone, by bringing
the temperature to the maximum heat level
for 10 minutes.
At the end of this timeframe, the cooking
zone heat level will automatically go back
to level "9". To activate this program, switch
on the cooking zone and press the [+] key
12
0 4
appears on the cooking