Set Language; Service Display; Switching Off The Machine - Weidmuller Crimpfix L Manual De Instrucciones Original

Operating the machine

6.8 Set language

► Select Menu 10.
► To activate the menu, press E.
10. language
---------------------------
C E
 
► Press  until the desired language is displayed.
The selected language is adopted immediately.
► To reach the production menu again, press C, or choose
another menu with the arrow keys.

6.9 Service display

1. production menu
ready VC: 25% Device is ready for operation
––– Service ––– Service display appears after
every 400,000 work cycles.
step: 2/0
C E
 
When the machine is switched on, the service display
flashes three times. After that the machine is ready for op-
eration.
To maintain the machine's performance capabil-
ity for as long as possible, you should keep to
the service intervals specified.
– Small service after 400,000 work cycles
– Big service after 800,000 work cycles
Refer to the Weidmüller representative respon-
sible for your country.

6.10 Switching off the machine

► Switch the machine off.
The valves are audibly relieved. The display goes out.
When you finish the work, you should empty the
waste container and put it back into the machine
(see section 7.4).
40 2518100000/03/06.2017