Electric Connections; Electric Wiring Diagram (Electronic Board With Potentiometer) - CUOGHI NEB6500 Manual Del Usuario

I
N S T A L L A T I O N

3.6 Electric connections

Installation provides for the utilization of an ON/OFF humidistat that controls starting and switching off the humidifier: it is, however, possible
to use instead, a simple ON/OFF contact with the only difference that the machine must be started and stopped manually. This choice however
does not in any way influence the installation procedure described below.
Installation must provide a separator switch for the appliance on the electric power supply, as shown in Fig. 13.
A 2.5A slow blow fuse must also be installed for the motor start-up.

3.6.1 Electric wiring diagram (electronic board with potentiometer)

Rif Descrizione
1 ON/OFF Humidistat
2 Float
3 Motor
4 Solenoid Valve
Fig. 13
Rif Descrizione
5 Heater (optional)
6 Temperature probe
7 Electronic card
8 Line protection (not supplied)
- 9 - M360-4-GB