Magic Chef MCSCD6W3 Manual Del Usuario página 10

QUICK FAUCET ADAPTER CONNECTION
THE QUICK FAUCET ADAPTER EASILY CONNECTS TO THE SINK FAUCET.
A) First remove aerator from your faucet nozzle and a ach the quick connect threaded
adapter to the faucet. The quick connect faucet adapter allows easy snap-on/snap-
off connec on to standard (7/8" diameter) faucets.
B) Connect the dishwasher Quick Connect Faucet Adapter to the faucet first to ensure
the hose length fits the dishwasher's selected loca on. Both hose and fi ngs must
be connected to the back of the dishwasher. The plas c water intake and drain
fi ngs are unique to each design and are made to easily fit the dishwasher.
! ! WARNING WARNING A hose that a aches to a sink spray can burst if it is installed on the same
water line as the dishwasher. If your sink has a sink spray, it is recommended that the hose
be disconnected and the hole plugged.
C) Water Intake Hose: Connect to the rear of the dishwasher using the large, 4-corner
shaped wing nut.
D) Drain Hose: Connect to the rear of the dishwasher. It is suggested you use pliers to
ghten but DO NOT over ghten. ghten but DO NOT over ghten.
1) Drain Port Connec on ort Connec on
2) Quick Connect Connec on
3) Inlet Port Connec on
4) Quick Connect Connec on
5) Faucet Adapter 5) Faucet Adapter
6) Faucet Washer
7) Pressure Relief Value
8) Faucet Adapter Connec on
9) Locking Collar 9) Locking Collar
10) Inlet Hose Connec on
11) Drain Hose Connec on
-PAGE 9-