INSTALLATION INSTRUCTIONS
UNPACKING AND PROPER PLACEMENT
UNPACKING
1.
Inspect and remove all packing materials. This includes the foam
and any adhesive tape both inside and outside of the unit.
2.
Inspect and remove any remains of packaging, tape, or printed
materials before powering on your appliance.
3.
Check to see if you have all of the following parts:
4.
Clean the interior surface with lukewarm water using a so cloth.
PROPER PLACEMENT
1.
First determine the best countertop surface loca on for your new
dishwasher. It must be close to a 120 Volt (15 Amp) outlet and a
sink with water supply and drainage system.
2.
The minimum height clearance required to install your dishwasher
on a countertop surface with overhead cupboards or kitchen
cabinets is 17.8". This countertop dishwasher is 17.2" in height.
(Reference the diagram on the next page for more informa on)
Quick Faucet Adapter (1)
Instruc on Manual (1)
Drain Hose for Permanent Installa on (1)
Measuring Cup for Powdered Detergent (1)
Measuring Spoon for Liquid Rinse Aid (1)
Outlet Hose Clamps (2)
Clip on Basket for 3-in-1 Tablets (1)
Rack (1)
Cutlery/Silverware Basket (1)
-PAGE 7-