Alarm Set Up - GPO WINCHESTER Manual Del Usario

anticlockwise, press select
To set auto update, press the "Select" button to turn it on/off.
To change from auto update to set clock display format turn the Tune
+/- clockwise or anticlockwise, press select
To set clock display format, rotate "Tune +/- " to choose between 12/24
Hour.

Alarm Set Up

Each step needs to be confirmed by pressing the "Select" button
This unit can set two alarms.
Press "Alarm" button, rotate "Tune +/- " to choose Alarm 1/ Alarm 2.
To set time, rotate "Tune +/- " clockwise or anticlockwise to adjust clock
by 01 minute and 01 hour.
To set days, rotate "Tune +/- " to select 4 modes one-off , weekdays ,
weekends and daily.
To set modes, rotate "Tune +/- " to select 3 outputs DAB , FM and
Buzzer.
To set volume, rotate "Tune +/- " clockwise or anticlockwise to increase
or decrease the volume.
Press "Select" button once to turn on the clock, press "Select" button
again to turn off the clock.
Press "Save" after all settings being done.
The Alarm symbol will be displayed on the LCD after it is successfully
set.
You can set two alarms at the same time.
11
GPO_Winchester_user_Manual EU - Sept 2018 V1.indd 11 10/09/2018 09:21