Securing Your Baby Using The Harness - Sparco CE R44/04 Manual De Instrucciones

1.2 Securing your baby using
the harness
Loosen the harness straps by pressing the
release button and pulling the harness
straps as far as you can.
Note! Do not pull the shoulder pads.
Open the
buckle, then place the
harness straps to the
sides of the car seat. Put
the baby into the car
seat.
The correct belt height of the shoulder
pads is attained when the strap disappears
into the shell slightly above the shoulder of
the child.
straps fit properly over the shoulders of
the child.
Slide buckle tongues together and insert
them in the buckle with an audible sound "
click".
Pull the straps tight by the harness adjust-
ment strap, and make sure the tightness is
comfortable to your kid.
CAUTION
Do not twist or interchange the harness straps.
10
Securing your baby
harness
Make sure that the harness
Click