Securing Your Baby Using The Harness - Sparco CE R44/04 Manual De Instrucciones

3.2 Securing your baby using the harness

Loosen the harness straps by pressing the
release button and pulling the harness
straps as far as you can.
Note! Do not pull the shoulder pads.
Open the harness buckle,
then place the harness
straps to the sides of the
car seat. Put the child into
the car seat.
The correct belt height of the shoulder
pads is attained when the strap
disappears into the shell slightly above
the shoulders of the child. Make sure that
the harness straps fit properly over the
shoulders of the child.
Slide the buckle tongues together and
insert them into the buckle - correct
connection will create an audible "click"
sound.
Tighten the straps by the harness
adjustment strap and make sure the
tightness is comfortable for your child.
Caution
Do not twist or interchange the harness straps.
Securing your baby
GB
ES
FR
IT
PT
DE
13