HAMPTON BAY 434 346 Manual Del Propietário página 11

Light Kit Option
CAUTION - To reduce the risk of electrical
shock, disconnect the electrical supply circuit
to the fan before installing light kit.
FAN WITH LIGHT KIT
1. Remove the three mounting screws on the
on the switch cup cover of the light fitter
(Figure 16).
2. Remove the finial, bottom cover, hex nut
and rubber washer from the light kit fitter.
3. Connect the wires from the light kit fitter
to the wires from the switch cup of the fan
motor assembly by connecting the molded
adaptor plugs together (blue to black, white
to white). Carefully tuck all wires and splic-
es into the switch cup (Figure 16).
Reversing
Switch
Mounting
Screw(3)
Blue
Black
Notch
Light Kit Fitter
Rubber Washer
Hex Nut
Finial
4. Align the three screw holes in the switch
cup cover with the screw holes in the switch
cup. Position the switch cup cover onto the
switch cup and install the three screws that
were loosened on step 1. Tighten the three
screws (Figure 16).
5. With power off, screw the CFL bulbs
(Max. 14W, provided) into the light socket
(Figure 17).
6. Place the glass bowl over the threaded nipple
(Figure 17).
7. Place the rubber washer over the threaded
nipple and then the hex nut. Firmly tighten
the hex nut to hold the glass bowl in place
(Figure 17).
8. Place the bottom cover on the threaded
nipple and then tighten the finial securely
(Figure 17).
CAUTION: DO NOT OVER TIGHTEN THE
HEX NUT OR FINIAL. THIS COULD CAUSE
DAMAGE TO THE GLASS BOWL.
Switch Cup
White
Switch Cup
Cover
Bottom Cover
Figure 16
Switch Cup
Threaded Nipple
Rubber Washer
Hex Nut
Bottom Cover
Finial
Bulbs
Glass Bowl
Figure 17
9.