Descargar Imprimir esta página

ITALFILE Jane TOP 02 Manual Del Usuario página 9

Ocultar thumbs Ver también para Jane TOP 02:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

DUPLICATION
TOP 02
version
THIS PROCEDURE IS DEDICATED TO MODELS THAT CAN ONLY BE GENERATED. THEREFORE THE
PROCEDURE TO THE RECEIVER IS DONE IN THE SAME WAY THAN THE ORIGINAL REMOTE.
For the generation of codes see the table rolling code generation procedure (see page 38).
During the procedure of duplication it is important to respect the key numeration: the key 1 of JANE can be associated
only with the key 1 of the original remote control.
MEMORISATION TO THE NICE RECEIVER
The procedure needs to be done near the receiver. Press the generated key of JANE for about 10 seconds. Press 3
times and then release the working key on the original remote Nice. Press again for 3-4 seconds the key on JANE that
has been generated. AWait 10 seconds to verify that the operation has succeed: press the generated key in order to
activate the opening of the gate.
MEMORISATION TO THE DITEC RECEIVER
The procedure needs to be done near the receiver. Using a tack, press the hidden key which is in the little hole in the
Ditec remote control, and release it when the led turns on. Press the generated key on JANE for about 6-7 seconds.
Wait 10 seconds to verify that the operation has succeed: press the generated key in order to activate the opening of the
gate.
MEMORISATION TO THE PRASTEL RECEIVER
The procedure needs to be done near the receiver. Press simultaneously and then release the keys 1 and 2 of Prastel:
the led turns on and off. When it turns on again press another time the keys 1 and 2, and wait for the led to flash 5
times; release them when the led flashes quickly. Wait 10 seconds to verify that the operation has succeed: press the
generated key to activate the opening of the gate.
MEMORISATION TO THE KING-GATES RECEIVER
The procedure needs to be done near the receiver. Press and release the key on the receiver: the led turns on. Press
the generated key on JANE and wait for the led to turn off and turn on.
List of original remotes for PROCEDURE
mod: VERY-VR
mod: FLO1R-S
mod: FLO2R-S
mod: FLO4R-S
DITEC
Remote:
2
2
1
1
4
3
mod: BXLS2
mod: BXLG4
03
Remote:
1
2
1
2
3
4
3
4
mod: FLOR1RE
mod: FLO2RE
mod: FLO4RE
1
2
3
4
mod: GOL4
mod: MPSTP2E
KING-GATES
Remote:
mod: STILO-2
mod: STILO-4
03
PROCEDURE
NICE
1
2
1
2
3
4
3
4
mod: ON1
mod: ON1E
mod: ON2
mod: ON2E
mod: ON4
mod: ON4E
mod: ON9
mod: ON9E
PRASTEL
Remote:
mod: B FOR
mod: CLIPPER
mod: INTI1
mod: INTI2
mod: TC4E
mod: MPSTL2E
mod: MPSTL4E

Publicidad

loading