Cleaning The Filter Element; Replacing The Filter Element - Stihl SE 61 Manual De Instrucciones

English
Refit the upper part of the vacuum
cleaner
N
Clean the edge of the container
N
Refit the upper part of the vacuum
cleaner
N
Clean the sleeve and intake port
before fitting the suction hose
28

Cleaning the filter element

N
Close slide on hand tube
N
Switch on machine
N
Press the opening of the hand tube
firmly against the flat surface of the
upper part of the vacuum – this will
seal the opening of the hand tube
(as shown in the picture)
N
Press the filter cleaning button 3
times
Dust deposits are removed from the filter
element.

Replacing the filter element

N
Unplug the power plug from the
socket
N
Remove upper part of vacuum
cleaner and turn it over
N
Turn the cover (1) in the direction of
the arrow and remove it
N
Remove filter element (2) and
dispose of it in accordance with the
statutory regulations
N
Check correct operation of the float:
the float must move easily when the
upper part of the vacuum cleaner is
turned over
N
Fit new filter element in the reverse
sequence of steps
N
Refit upper part of the vacuum
cleaner
SE 61, SE 61 E