Date & Time Setting; Controller Name Setting; Access Parameters To Operator (Operating Parameters); Operation Mode - Full Gauge V.03 Manual De Instrucciones

C12 - Temperature Unit
Temperature measurement unit.
C13- RS485 Network Address
Device address in the network for communicating with SITRAD software.
Note: you cannot have two devices with the same address in a network.
5.12 - Date & Time Setting
Functions for setting the controller's internal clock. This option allows you to adjust date and time settings:
01-Date adjust
02-Time adjust
To enter the selection, press . Date or time will be displayed according to your selection. Adjust the values by pressing the
select to enter the setting. Repeat this procedure to configure all the values. Press
one.
5.13 - Controller Name Configuration
This function allows you to configure the controller name, which is used to differentiate data from various
dataloggers are all downloaded to the same flash drive.
When you enter this function, each character value can be changed by using the
next character. After entering the last character, press
cancel the setting when you are in the first character.

6 - ACCESS PARAMETERS TO OPERATOR (OPERATING PARAMETERS)

In this menu you can configure the parameter settings related to the current
To enter the operation menu press the
Press to enter your selection. To go back, press
or press to cancel it. Note: When changing the operation mode, the day count of the programming mode is reset.
01 Operation mod -
02 Datalog activ -

6.1 - Operation Mode

This function allows you to choose the
- Manual Operation Mode
Manual
- Programming Mode
Program

6.2 - Manual Datalogger ON/OFF

This function allows you to manually turn the datalogger ON/OFF.

7 - MANUAL MODE FUNCTIONS

On the functions menu of the manual mode, you can easily access the operation options when the controller is using the daily setpoint configuration.
To enter this menu, short press the
This menu is available only when the controller is operating in "Manual Mode", adjustable in the "Operation Mode".
Available selections are:
01 Manual setp -
02 Rst Max Min -

7.1 - Manual temperature setting

This function allows you to configure the temperature setpoint the

7.2 - Reset maximum and minimum temperature of the manual mode

This function allows resetting the record of maximum and minimum temperatures of the manual mode.
®
Date setting
Time setting
to confirm the new name. The
key for 2 seconds until Operation Mode is displayed.
MENU
. Value setting is selected through the
For choosing the
Humitech Super
For manually turning Datalogger ON/OFF.
operation mode.Available selections are:
Humitech Super
button.
MENU
Manual temperature setting
Reset maximum and minimum temperature of the manual mode
Humitech Super
to cancel the current setting and return to the previous
and keys. Press
key is used to go back to the previous setting or to
Humitech Super.
and
operation mode;
will use when set to Manual Operation mode.
36
and keys and
when their
Humitech Super
to enter the selection and go to the
keys. Press to confirm the operation