Denon AVR-2802 Instrucciones De Operación página 6

ENGLISH
Connecting a Video Component Equipped with Color Difference (Component
- Y, P /C , P /C ) Video Jacks (DVD Player)
R R B B
• When making connections, also refer to the operating instructions of the other components.
• The signals input to the color difference (component) video jacks are not output from the VIDEO output jack
(yellow) or the S-Video output jack. In addition, the video signals input to the VIDEO input (yellow) and S-Video
input jacks are not output to the color difference (component) video jacks.
• The AVR-2802's on-screen display signals are not output from the color difference (component) video output
jacks (MONITOR OUT).
• Some video sources with component video outputs are labeled Y, C
terms all refer to component video color difference output.
DVD player
COMPONENT
VIDEO OUT
B
C C Y
R B
COMPONENT
VIDEO IN
Y C
B
6
, C , or Y, P , P , or Y, R-Y, B-Y. These
B R b r
Connecting a DVD player
DVD IN jacks
• Connect the DVD player's color difference (component)
video output jacks (COMPONENT VIDEO OUTPUT) to the
COMPONENT DVD IN jack using 75 Ω/ohms coaxial video
pin-plug cords.
• In the same way, another video source with component
video outputs such as a TV/DBS tuner, etc., can be connected
to the TV/DBS color difference (component) video jacks.
Monitor TV
Connecting a monitor TV
MONITOR OUT jack
• Connect the TV's color difference (component)
C
R
video input jacks (COMPONENT VIDEO INPUT)
to the COMPONENT MONITOR OUT jack using
75 Ω/ohms coaxial video pin-plug cords.
• The color difference input jacks may be indicated differently on some
TVs, monitors or video components ("C , C
R
"Pr, Pb and Y", etc.). For details, carefully read the operating instructions
included with the TV or other component.
Connecting the antenna terminals
DIRECTION OF
BROADCASTING
STATION
75 Ω/ohms
COAXIAL
CABLE
FM INDOOR
ANTENNA
(Supplied)
AM loop antenna assembly
and Y", "R-Y, B-Y and Y",
B
1 2
Remove the vinyl tie
and take out the
connection line.
4
a. With the
antenna on
top any
stable
surface.
b. With the
antenna
attached to
a wall.
Installation hole Mount on wall, etc.
FM ANTENNA
GROUND
Connect to the AM
antenna terminals.
1. Push the
3
lever.
Bend in the reverse
direction.
Notes:
• Do not connect two FM antennas
simultaneously.
Mount
• Even if an external AM antenna is used, do
not disconnect the AM loop antenna.
• Make sure AM loop antenna lead terminals
do not touch metal parts of the panel.
AM LOOP
ANTENNA
(Supplied)
AM OUTDOOR
ANTENNA
Connection of AM antennas
2. Insert the 3. Return the
conductor. lever.