WIRING
BLACK
TO
BLACK
WHITE
TO
WHITE
Ventilator can be wired from outside of housing.
Use UL approved connectors to wire per local codes.
MOUNTING OPTIONS
¼-20 hex nuts secure mounting brackets to housing. Loosen and
re-tighten or remove and replace nuts as necessary for desired
mounting bracket position.
Factory-Shipped
Straight-Through
Discharge
22"
Mounting brackets in
factory-shipped position -
mounted directly to joists.
(Outlet parallel to joists.)
(New construction)
Housing Con-
verted to Right-
Angle Discharge
18"
Mounting brackets flipped
over and mounted to ad-
ditional framing.
(Outlet vertical.)
(New or Existing construction)
EDGE
OF HOUSING
GROUND TO
WIRING PLATE
WIRING
120 VAC LINE IN
(from range hood)
Factory-Shipped
Straight-Through
1
/
"
1
8
Discharge
MAX.
18"
Mounting brackets flipped
over and mounted to ad-
ditional framing.
(Outlet perpendicular to joists.)
(New or Existing construction)
Factory-Shipped
1½"
Straight-Through
to
2½"
Discharge
22"
Mounting brackets flipped
ADUSTABLE FOR VARIOUS CEILING THICKNESSES
over and mounted to top of
housing. Housing secured
with cables.
(Outlet parallel to joists.)
(New or Existing construction)
WIRING PLATE POSITION
PLATE
HORIZONTAL POWER
CABLE CONNECTION
Wiring plate mounts to side or top of housing.
DUCTING OPTIONS
BLOWER DISCHARGE POSITIONS
MOVABLE
PANEL
1½"
to
DUCT
2½"
CONNECTOR
(intake)
Ventilator shown in
straight-through discharge
position. (Factory shipped)
DUCTING (Vertical blower discharge)
8" X 12" TO
10" ROUND
TRANSITION
(MALE)
8" X 12" TO 10"
ROUND
TRANSITION
(FEMALE)
10" ROUND
DUCT
Typical ductwork connection to a ventilator converted to
DUCT
Housing
CONNECTOR
rotated & mov-
(outlet)
able panel cov-
ers previous
open side.
DUCT
CONNECTOR
(intake)
Ventilator shown in right-
angle discharge position.
(Change movable panel to
new location as shown.)
right-angle discharge.
Page 3
VERTICAL
POWER CABLE
CONNECTION
DUCT
CONNECTOR
(outlet)
MOVABLE
PANEL
(Change to this
location)
ROOF CAP
10" ROUND
DUCT