How To Read System Circuit Diagram (Section 8A-7) - Suzuki SY413 Manual De Servicio Relacionado

8A-1-14 HOW TO USE THIS MANUAL
HOW TO READ SYSTEM CIRCUIT DIAGRAM
The circuit diagram of each system shows the electric circuit from the main fuse, fuse box or the ignition switch
(at the top in the diagram) to the ground (at the bottom) so that the circuit can be followed easily when per-
forming inspection and service work.
Further information on connector, ground point and fuses is provided by cross-reference of "SYSTEM CIR-
CUIT DIAGRAM" and the other sections as described in the preceding indications of this section. Connector
code, ground No. and fuse No. are the reference code for cross-reference.
Fuse No.
This No. indicates the refer-
ence code to "POWER SUP-
PLY DIAGRAM" (Refer to
"POWER SUPPLY DIAGRAM"
for the continuity of the upper
circuit.)
Connector mark
This indicates that the connec-
tor is identical.
This indicates that the
shield wire.
Wire color
This indicates the wire color.
(Refer to item "WIRE COLOR
SYMBOLS" in "HOW TO USE
THIS SECTION".)
This indicates the variations
by the specifications
4-DOOR
1
2-DOOR
2
3
FUSE BOX
15A
BLU
A 5
6
B
BLU
E33 1
CONTROL UNIT
2 5
ORN
GRN/BLK
1
GROUND POINT
This indicates the ground
A
No.
(Refer to "GROUND POINT"
section for the location.)
This indicates that the circuit
is continued to the same sym-
bol in the other page.
Variations by specifications
are identified by codes.
For the details, refer to the
lower left of this page.
COMBINATION
METER
(REED)
GRN/RED
YEL
7
E34 5
6
BLK
WHT
2
BLK
SENSOR
8
This indicates continuity
between pages, i.e., to be
continued to the same
symbol in the other page.
1
4