Alarm wake-up light
The light will come on 30 minutes before the set alarm time. The light will start
out at a low level and increase gradually to the set max level.
Wake up by radio or buzzer with mood light
Even you did not press the "ON" button of mood light, when the alarm on, the
mood light will also come with the alarm.
SNOOZE Function
When alarm rings, press SNOOZE button (9) to activate the snooze function,
Beep alarm or Radio alarm will stop.
Note: The interval time of the Snooze is 9 minute (not include second offset)
SNOOZE will continue unless press
Radio Alarm stop automatically after 30 minutes.
-
The indicators AL1 / AL2 flash on the display while the SNOOZE function
is enabled. Once the SNOOZE function is off, the indicators AL1 / AL2 stop
flashing and light up on the display.
Playing the radio
1. Press the
button (8) to turn the unit on.
2. Use the
(2) &
press and hold the Tune + or Tune – button for one second, then release,
the unit will automatically scan to the next broadcasting station.
3. Press the
button (8) to turn the radio OFF.
NOTE: Ensure that the FM antenna is completely unrolled and extended for
best FM reception.
To set/recall the radio presets
1. Press the
button (8) to turn the unit ON.
2. Use the
(2) &
3. Press and hold the MEM/M+ (5); "P01" will blink in the display.
4. Use the
(2) &
5. Press the MEM/M+ (5) button again to set the preset.
6. Repeat steps 2 through 5 to set more presets.
7. The unit can preset 10 stations totally for FM.
8. When "P01-P10" is blinking, press the
preset number.
9. To recall a preset station, press MEM/M+ (5) button to select the preset
number.
button (8) to alarm off of buzzer alarm or
RADIO mode
(4) button to select the desired radio station. If you
(4) button to select the desired radio station.
(4) button to select the desired preset station (P01-P10)
21
(2) &
(4) button to select the