Specifications Techniques - Akai AC-151W LIGHTY Manuel Del Usuario

USB devices: DC 5V
The unit can charge for mobile phone via USB cable (the USB cable is not be
supplied).
If the system does not respond or exhibits erratic or intermittent operation, you
may have experienced an electrostatic discharge (ESD) or a power surge that
triggered the internal microcontroller to shut down automatically. If this occurs,
simply disconnect the ac power cord and remove the system backup battery,
wait for at least 3 minutes and then setup the unit again as if it is a brand new
unit.
NOTE
If you replace the battery, do not disconnect AC plug from AC outlet. Otherwise,
current time and alarm will be initialized.
Power supply
Power consumption in working mode
Power consumption in standby mode <1 W
Radio Frequency range
Audio output
Battery backup
Net Weight
Dimensions
Temperature Sensor Range:
The lamp & mood night life time
Due to continual revision and improvement on our products design,
specifications are subject to change without further notice.
USB charging socket
Reset

SPECIFICATIONS TECHNIQUES

AC 100-240V 50- 60 Hz
DC 5V 1500mA
5 W
FM 87.5 – 108 MHz
0.3W RMS
3V (CR2032 Flat Lithium battery x 1)
410 g
60 x 180 x 100 mm
32 °F to 122 °F (0°C to +50°C)
20000h
IMPORTANT:
23