Accessing The Web Configurator - Zyxel P-335U Guia De Inicio Rapido

The LEDs
Look at the front panel LEDs. When you
connect the power, the PWR LED blinks and
stays on once the device is ready. About 30
seconds later, the A/G LED also comes on.
The LAN and WAN LEDs turn on if the
corresponding connections are properly made.

2 Accessing the Web Configurator

1 Launch your web browser. Enter "192.168.1.1" as the web site address.
Note: If the login screen does not display, check your browser's security settings (see
Troubleshooting for details) or make sure your computer is set to receive an IP address
dynamically (see
2 The Password window displays. Enter the
password ("1234" is the default) and click Login.
3 Change the password in the screen that follows
and click Apply.
Set Up Your Computer's IP
ENGLISH
Address).
4 Click Go to Wizard setup to set up your P-335U for
the first time.
5