Connect To A Computer - Optoma DC350 Manual Del Usuario

Connect to a computer

▶ Passthrough Function
Use VGA Cable to connect VGA IN connector on the document
camera to the VGA OUT connector on the computer
To display computer image, press PASSTHROUGH button (
panel.
For laptop to output display mode, use the keyboard command ( Fn +
swtich between the display modes. For different command, please refer to your
laptop manual.
The signal is only pass through from VGA IN port to VGA OUT port on document
camera.
Please connect an output device to display the image on computer.
▶ Connect via USB
Press MENU (
Choose "Disk" to connect mass storage.
Choose "PC Cam" to use as a PC-Cam.
RGB
→ select "USB Connect".
) button
13
) on the control
) to