Turn It On & Off - Motorola MOTOKRZR K1m Manual De Instrucciones

2 Plug the other end of the charger into the
appropriate electrical outlet.
3 When your phone displays Charge Complete,
remove the charger.
Tip: Relax! You can safely leave the charger
connected to the phone after charging is
complete. This will not damage the battery.
When you charge the battery, the battery level
indicator at the upper right of the screen
shows charging progress. At least one
segment of the indicator must be visible to
ensure full phone functionality while charging.
To charge from your computer:
You can charge your phone's battery by
connecting a cable from your phone's
mini-USB port to a high-power USB connector
on a computer (not a low-power one, such as
the USB connector on your keyboard or
bus-powered USB hub). Typically, USB
12 essentials
high-power connectors are located directly on
your computer.
Both your phone and your computer must be
turned on, and you must have correct
software drivers installed on your computer.
Cables and software drivers are available in
TM
Motorola Original
turn it on & off
To turn on your
phone, press and
hold O for a few
seconds or until
the display turns
on. If prompted, enter your four-digit unlock
code.
To turn off your phone, press and hold O for
two seconds.
data kits, sold separately.
Power
Key