Standard Accessories; Optional Accessories; Spare Parts - Fein RSG Ex 1500 A Manual Del Usuario

3 41 01 261 06 0.book Seite 29 Montag, 16. April 2018 12:03 12

Standard accessories

Reference Quan- Description
number tity
3 39 01 114 00 7 1 Transport container
3 39 01 031 00 1 1 Carrying case
3 21 22 007 01 7 1 Handwheel
6 29 01 016 00 2 1 Open-jawed wrench, SW 46
6 29 03 010 00 6 1 Open-jawed wrench, SW 55
3 12 07 333 01 0 1 Chain tensioner
6 29 11 010 00 0 1 Ring spanner, 17/19
6 29 06 013 00 5 1 Box spanner, SW 46
3 02 31 029 00 2 10 Roller chain
3 02 17 216 00 4 20 Bolt
4 26 34 020 00 5 40 Securing ring
6 33 05 006 00 8 10 Drift only for RSG 1500 A/B (**),
RDG 1500 A/B (**)
6 33 05 013 00 2 5 Drift, non-sparking
only for RSG Ex 1500 A/B (**)
3 07 02 041 01 4 1 Switchgear combination only for
RSG 1500 A/B (**),
RSG Ex 1500 A/B (**)
3 21 74 009 00 1 1 Round loop
3 21 74 010 00 3 1 Round loop
3 07 28 188 00 8 1 CEE coupling for RSG 1500 A/B (**)
and RSG Ex 1500 A/B (**)
3 21 32 006 01 7 1 Oil can only for
RDG 1500 A/B (**)
3 27 15 129 02 0 1 Maintenance unit ass. only for
RDG 1500 A/B (**)
3 14 14 001 02 3 1 Hose ass. only for
RDG 1500 A/B (**)
3 02 31 035 02 0 1 Chain
3 02 16 166 01 0 1 Bolt
3 40 56 026 00 0 1 Insertion discs

Optional accessories

Reference number Quantity Description
3 02 31 013 02 7 1
4 26 34 020 00 5 1
3 02 17 216 00 4 1
4 30 12 051 12 2 1
6 33 05 013 00 2
3 07 09 022 01 2 1
9 12 01 002 00 4
3 24 33 027 01 7 1
3 27 15 129 02 0 1
9 26 01 023 02 3 1
3 14 14 055 00 2 1
4 11 36 005 01 9 1
3 02 31 035 02 0 1
3 02 16 166 01 0 1
3 40 56 026 00 0 1
Chain with 10 links
Securing ring
Bolt
Tight-fit screw
Non-sparking drift
Connection cable (electric)
Compressed-air cooling-lubricant
device (DKSE)
Connection parts for CCLU (board)
Maintenance unit ass. only for
RDG 1500 A/B (**)
Compressor for CCLU
PA-DL hose, complete, for com-
pressor
Coupling sleeve
Chain
Bolt
Insertion discs
Compressed-air, cooling-lubricant
device 9 12 01 002 00 4
Due to the possible high cutting and advancing speeds of the pipe mil-
ling machine, it is necessary to cool and lubricate the tools when
machining steel. The compressed-air, cooling-lubricant device func-
tion on the principle of finely dispersing and vapourising the cooling
lubricant and thereby offers constant, reliable cooling and lubrication
through the spray nozzles fitted on the pipe milling machine.
In addition, pollution of the ground at the building site is avoided
which is otherwise normally caused by applying the drilling emul-
sion manually.
As a cooling-lubricant fluid we recommend using the metal-working
lubricant, BIOCUT 3000. It is a new kind of fully synthetic, high-per-
formance lubricant; it has an excellent adhesion and cooling effect, is
water-soluble, biologically well-decomposable and economical
(depending on the setting, up to approx. 0.3 dm
BIOCUT 3000 is free from any substances endangering the health.
It fulfils all the requirements of the German association, Deutscher
Verein des Gas- und Wasserfachs e. V. (DVGW).
All the contents comply with the Directives of the FDA (Food and
Drug Administration) and the Deutsches Arzneibuch (DAB) [Ger-
man book on medicine] in its currently valid version.
The lubricant can be purchased from the company:
Lubricating agent BIOCUT 3000 for temperatures to 0°C:
1L - 3 21 32 039 00 0
5L - 3 21 32 040 00 0
Cold-resistant lubricating agent for temperatures to -25°C:
1L - 3 21 32 042 00 0
5L - 3 21 32 043 00 0
Fa. Link GmbH
Am Herrenweg 6
D-76228 Karlsruhe
Tel. +49 (0) 721/45 05 55
Fax +49 (0) 721/45 14 11
e-mail: link-gmbh@t-online.de
internet: http://www.microjet.de
For the three-phase-current versions RSG (**)/RSG Ex (**), a com-
pressor is required, i.e. FEIN reference number 9 26 01 023 02 3,
with a suction volume of approx. 130 l/min, for enabling the use of
the compressed-air, cooling-lubricant device.

Spare parts.

The latest spare parts list can be found on the Internet under
www.fein.com.
en
29
3
/h per nozzle).