Axxess AW-INGM1 Instrucciones De Instalación

GM Data Bus Interface 2000-up
• Provides accessory power (12-volt 10-amp)
• Retains R.A.P. (retained accessory power)
• Provides NAV outputs (parking brake,
reverse, and speed sense)
• Can be used in analog amplified or non-
amplified models, or when bypassing a
factory amplifier
• AW-INGM1 interface • LD-LCGM1-RCA harness • LD-LCLAN1-RCA harness
• Wire cutter • Crimp tool • Solder gun • Tape
• Connectors (example: butt-connectors, bell caps, etc.)
®
Axxess Integrate
Installation instructions for part AW-INGM1
AW-INGM1
INTERFACE FEATURES
• Used in models without OnStar
• Retains all warning chimes
• High level speaker input
• Retains balance and fade
• Micro "B" USB updatable
INTERFACE COMPONENTS
TOOLS REQUIRED
APPLICATIONS
See inside front cover
axxessinterfaces.com
®
Connections to be made ..................................... 3-4
From the LD-LCGM1-RCA harness .....................3
From the LD-LCLAN1-RCA harness ...................4
Installing the Axxess Interface ..............................5
Initializing the Axxess Interface ............................5
CAUTION!
especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
•
metraonline.com
Table of Contents
All accessories, switches, climate controls panels, and
© COPYRIGHT 2017 METRA ELECTRONICS CORPORATION