Assembly - HAMPTON BAY 513-911 Guía De Uso Y Mantenimiento

Assembly

1
Secure the canopy to the tube
□
Place the nipples (R) into the two holes on the canopy (A).
□
Place the washers (Q) over the nipples (R).
□
Use the wrench (O) to screw the hex nuts (P) onto the
nipples (R).
3
Connect the electrical wires
□
Wrap the ground wire from the fixture around the
ground screw (K) on the cross bar (J), and then
connect the ground wire from the fixture to the ground
wire from the outlet box.
□
Connect the white wire from the fixture to the white wire
(neutral wire) from the outlet box.
□
Connect the black wire from the fixture to the black wire
(live wire) from the outlet box.
□
Cover the three connections using the three wire
connectors (I). Wrap the three wire connections with
electrical tape for a more secure connection.
□
Position the wires back inside the outlet box.
Attach the cross bar to the outlet
2
box
□
Screw the mounting screws (M) into the cross bar (J).
□
Mount the cross bar (J) to the outlet box using the two
outlet box screws (L).
4