Specific Safety Rules - Power Stroke PSL1PS11 Manual Del Operador

IMPORTANT SAFETY INSTRUCTIONS
 Do not leave the unit energized or under pressure while
unattended. When the unit is not in use, turn off the
unit and relieve the pressure in accordance with the
manufacturer's instructions.
 High pressure spray is able to inject toxins into the body
and cause serious bodily injury. In the event that injection
occurs, seek medical attention immediately.
 Check hoses and parts for signs of damage. Replace any
damaged hoses or parts.
 This system is capable of producing 2,800 psi. Only use
replacement parts or accessories that are specified by
the manufacturer and are rated a minimum of 3,200 psi.
 Always engage the trigger lock when not spraying. Verify
the trigger lock is functioning properly.
 Verify that all connections are secure before operating
the unit.
 Know how to stop the unit and bleed pressure quickly.
Be thoroughly familiar with the controls.
 Keep guards in place and in working order. Never op-
erate the paint sprayer with any guard or cover removed.
Make sure all guards are operating properly before each
use.
 To reduce the risk of injury, keep children and visitors
away. All visitors should wear safety glasses and be kept
a safe distance from work area.
 Keep the area of operation clear of all persons,
particularly small children, and pets.
 Use right paint sprayer. Don't force paint sprayer or
attachment to do a job it was not designed for. Don't
use it for a purpose not intended.
 Do not operate the equipment while barefoot or when
wearing sandals or similar lightweight footwear. Wear
protective footwear that will protect your feet and improve
your footing on slippery surfaces.
 Exercise caution to avoid slipping or falling.
 Always wear eye protection with side shields marked
to comply with ANSI Z87.1. Failure to do so could result
in fluids entering your eyes resulting in possible serious
injury.
 Use only recommended accessories. The use of im-
proper accessories may cause risk of injury.

SPECIFIC SAFETY RULES

Page 4 — English
WARNING: To reduce the risk of injury:
 Always wear appropriate gloves, eye protection
marked to comply with ANSI Z87.1, and a respirator
or mask when painting.
 Do not operate or spray near children. Keep children
away from equipment at all times.
 Do not overreach or stand on an unstable support.
Keep effective footing and balance at all ti mes.
 Stay alert and watch what you are doing.
 Do not operate the unit when fatigued or under the
influence of drugs or alcohol.
 Do not kink or overbend the hose.
 Do not expose the hoses to temperatures or to pres-
sures in excess of those specified by the manufacturer.
 Do not use the hose as a strength member to pull or
lift the equipment.
 Follow the maintenance instructions specified in this
manual.
 Check damaged parts. Before further use of the paint
sprayer, a guard or other part that is damaged should be
carefully checked to determine that it will operate properly
and perform its intended function. Check for alignment
of moving parts, binding of moving parts, breakage of
parts, mounting, and any other conditions that may af-
fect its operation. A guard or other part that is damaged
must be properly repaired or replaced by an authorized
service center to avoid risk of personal injury.
 Never leave paint sprayer running unattended. Turn
power off. Don't leave paint sprayer until it comes to a
complete stop.
 Follow manufacturer's recommendations for safe
loading, unloading, transport, and storage of machine.
 Be thoroughly familiar with controls. Know how to stop
the product and bleed pressure quickly.
 Keep paint sprayer dry, clean, and free from oil and
grease. Always use a clean cloth when cleaning. Never
use brake fluids, gasoline, petroleum-based products, or
any solvents to clean paint sprayer.