Disinfecting And Cleaning; Maintenance/Repairs; Technical Service Center - Bowa 050-230 Instrucciones De Uso

4.

Disinfecting and Cleaning

Note
Incorrect handling of the testing device may result in damage!
Never sterilize the testing device. Always clean or disinfect it instead.
Warning
Risk of electric shock and fire!

Always disconnect the power plug prior to cleaning.

When cleaning surfaces, only use cleaning agents/disinfectants approved by the
manufacturer.

Make sure that liquid does not enter the device.
Cleaning
Use a damp cloth and mild cleaning agent to clean the casing. Never use abrasive
cleaning agents or solvents. Dirt and/or moisture in the connections can have a
negative effect on testing.
5.

Maintenance/Repairs

Note
To prevent damages, do not attempt repairs or modifications to the testing
device yourself!

If repairs are necessary, contact the Technical Service Center specified below.

Never attempt repairs to the device yourself.
BOWA will be liable for the safety, reliability and performance of the testing device
under the following conditions:

All the instructions regarding installation as well as correct and intended
usage contained in this operating manual have been followed precisely.

Modifications, repairs, new settings, etc. have been carried out by BOWA
authorized service technicians.

Electrical installations in the relevant room meet local requirements and
statutory provisions.
5.1

Technical Service Center

Contact the following Technical Service Center for maintenance and repair work:
BOWA-electronic GmbH & Co. KG
Heinrich-Hertz-Strasse 4–10
72810 Gomaringen, Germany
Phone +49 (0) 7072-6002-0
Fax +49 (0) 7072-6002-33
or visit our website:
www.bowa-medical.com
MN030-423-IFU-M098-050230-S3-20151026 Testing Device Page 7