General Safety Instructions For Power Tools - Bora Portamate PM-3550 Manual Del Operador

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Warning:
ALL power tool must be bolted securely to stand before use.
Warning:
Read Owners Manual carefully and be completely familiar with the correct and safe operation
of each power tool before use.
Failure to follow these rules may result in serious personal injury.

General Safety Instructions for Power Tools

Using power tools of any kind can be dangerous if safe operating procedures are not followed.
Recognizing the hazards of each tool and using them with respect and caution will considerably limit
the possibility of personal injury. However, if safety precautions are ignored, personal injury will likely
result. Always use common sense – your personal safety is your responsibility.
1.
Know your power tool. Read and understand the Operator's Manual and observe the
warnings and instruction labels affixed to the tool.
2.
Properly ground all tools.
3.
Keep guards in place.
4.
Remove adjusting keys and wrenches.
5.
Keep work area clean and dry.
6.
Keep children away.
7.
Never leave running machines/tools unattended.
8.
Disconnect tools from service when stored or not in use.
9.
Use correct tools for the job.
10. Never force a tool.
11. Wear safety apparel.
12. Wear safety glasses/goggles and hearing protection.
13. Never stand or sit on tools.
14. Replace damaged components immediately.
15. Make sure your work platform is sufficiently sturdy to do the specific job at hand.
16. Properly anchor power tools to work stands.
17. Use correct blade for job being done.
18. Think Safety. Safety is a combination of operator awareness, common sense and
alertness at all times.
3

Publicidad

Tabla de contenido
loading

Tabla de contenido