Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Warning:
Any power tool must be bolted securely to stand before use.
Warning:
Read Owners Manual carefully and be completely familiar with the correct and
safe operation of each power tool before use.
Failure to follow these rules may result in serious personal injury.
General Safety Instructions for Power Tools
Using power tools of any kind can be dangerous if safe operating procedures are not followed. Recognizing the
hazards of each tool and using them with respect and caution will considerably limit the possibility of personal
injury. However, if safety precautions are ignored, personal injury will likely result. Always use common sense –
your personal safety is your responsibility.
1.
Know your power tool. Read and understand the Operator's Manual and observe the
warnings and instruction labels affixed to the tool.
2.
Properly ground all tools.
3.
Keep guards in place.
4.
Remove adjusting keys and wrenches.
5.
Keep work area clean and dry.
6.
Keep children away.
7.
Never leave running machines/tools unattended.
8.
Disconnect tools from service.
9.
Use correct tools for the job.
10.
Never force a tool.
11.
Wear safety apparel.
12.
Wear safety glasses/goggles.
13.
Never stand or sit on tools.
14.
Replace damaged components immediately.
15.
Make sure your work platform is sufficiently sturdy to do the specific job at hand.
16.
Properly anchor power tools to work stands.
17.
Use correct blade for job being done.
18.
Think Safety. Safety is a combination of operator awareness, common sense and
alertness at all times.
3
Publicidad
Tabla de contenido
