Personalisations; Setting The Temperature; Functions - Indesit WITP 1021 Instrucciones Para El Uso

Personalisations

C

Setting the temperature

Turn the TEMPERATURE knob to set the wash temperature (see Programme table on page 6).
The temperature can be lowered, or even set to a cold wash ( ).
Note. To avoid excessive vibrations, before every spin cycle the machine distributes the load in a uniform manner by conti-
nuously rotating the drum at a speed which is slightly faster than the normal washing speed.
When, despite repeated attempts, the load is still not evenly distributed, the machine spins at a lower speed than the set
frequency.
If the load is excessively unbalanced, the machine attempts to distribute it instead of spinning.
The balancing attempts may extend the total duration of the cycle, up to a maximum of 10 minutes.

Functions

To enable a function:
1. press the button corresponding to the desired function, according to the table below;
2. the function is enabled when the corresponding button is illuminated.
Note: The rapid flashing of the button indicates that the corresponding function cannot be selected for the programme set.
Option Effect
Bleaching cycle de-
signed to remove the
toughest stains.
Bleaching
Increases the efficien-
cy of the rinse.
Extra Rinse
Reduces the spin
1000 speed.
500
Reduces fabric crea-
sing, making ironing
easier.
Anti-crease
Comments
Please remember to pour the bleach into extra compartment 4
(see page 8).
Recommended when the appliance has a full load or with large
quantities of detergent.
Setting this function will interrupt programmes 11 with a laundry
soak (Anti-crease) and the Rinse phase indicator light
To complete the cycle, press the Anti-crease button.
Enabled with
programmes:
2, , , 5,
6, 7, 8, Rinse
cycles.
1, 2, , ,
5, 6, 7, 8, 10,
11 and Rinse
cycles.
All program-
mes except
for 11 and
draining.
1, 2, , , 5,
will blink.
6, 7, 8, 11.
7
GB