Publicidad
Idiomas disponibles
Idiomas disponibles
COMMISSIONING THE DEVICE AND TESTING ITS FUNCTIONING
Commissioning the device
WARNING
Risk of shearing between fastening plate and device housing when lifting the drive roll.
Never reach between the fastening plate and the device housing.
The further out on the carriage the drive wheel is mounted, the greater the danger of crus-
hing when lifting and lowering the drive wheel..
WARNING
Risk of shear injury on the inner parts of the unit.
Never put your hand inside the unit if it is connected to the control.
During operation with hospital beds or medical equipment, ensure that all applicable laws,
standards and guidelines are observed and followed.
Puesta en marcha del equipo
ATTENTION!
When the arrangement is offset from the centre and there is unequal weight distribution on
the carriage, then the carriage can be lifted on one side when the drive wheel is lowering.
Ensure that the carriage is evenly loaded.
WARNING
Risk of burns due to contact with a hot surface.
Excessive heat may build up on the unit during operation.
Avoid contact with the drive unit, particularly with the driving motor.
Use the unit as described in the operating instructions for the connected control.
Setting the micro switch
By setting the micro-switch, you can adapt the unit to various controls. For adjustment, you
need a screwdriver that matches the screw type.
The micro-switch switches off the servo-motor for lifting the drive wheel. By moving the
micro-switch (2), you can adjust how high the drive wheel is raised:
26
Publicidad
