Electrical Connection - Grundig GWN 39230 R Manual Del Usuario

• Adjust the feet until the product
stands level and balanced.
• Tighten all lock nuts again by
hand.
A
WARNING: Do not use any
tools to loosen the lock
nuts. Otherwise, they will
get damaged.

Electrical connection

Connect the product to a grounded
outlet protected by a 16 A fuse. Our
company shall not be liable for any
damages that will arise when the
product is used without grounding in
accordance with the local regulations.
• Connection must comply with
national regulations.
• The wiring for the electrical outlet
circuit must be sufficient to meet
the appliance requirements. Use
of a Groud Fault Circuit Interrupter
(GFCI) is recommended.
• Power cable plug must be within
easy reach after installation.
• If the current value of the fuse
or breaker in the house is less
than 16 Amps, have a qualified
electrician install a 16 Amp fuse.
• The voltage specified in the
"Technical specifications" section
must be equal to your mains
voltage.
• Do not make connections via
extension cables or multi-plugs.
B
WARNING: Damaged
power cables must be
replaced by the Authorized
Service Agents.
Transportation of the product
• Unplug the product before
transporting it.
• Remove water drain and water
supply connections.
• Drain all water that has remained
in the product.
• Install transportation safety bolts
in the reverse order of removal
procedure; .
C
Never move the product
without the transportation
safety bolts properly fixed in
place!
A
WARNING: Packaging
materials are dangerous to
children. Keep packaging
materials in a safe place away
from reach of the children.
EN
59