Functions/Programmes Selected By; Seconds; End Time - Grundig GWN 39230 R Manual Del Usuario

• Extra Rinse
This function enables the product to
make another rinsing in addition to
the one already made after the main
wash. Thus, the risk for sensitive
skins (babies, allergic skins, etc.) to
be effected by the minimal detergent
remnants on the laundry can be
reduced.
Functions/Programmes Selected
by Pressing the Function
Buttons for 3 Seconds
• Drum Clean
Press and hold the auxiliary function
button 1 for 3 seconds to select the
programme.
Use regularly (once in every 1-2
months) to clean the drum and
provide the required hygiene. Operate
the programme while the machine
is completely empty. To obtain better
results, put powder lime-scale
remover for washing machines into
the detergent compartment no. "2".
When the programme is over, leave
the loading door ajar so that the
inside of the machine gets dry.
C
This is not a washing
programme but a
maintenance programme
for the machine.
Do not run the programme
when there is something
in the machine. If you try to
do so, the machine detects
that there is load inside and
aborts the programme.
• Child Lock
You can prevent children from
tampering with the machine by using
the Child Lock feature. Thus you
can avoid any changes in a running
programme.
74
C
You can switch on and off the
machine with On / Off button
when the Child Lock is active.
Programme resumes when
you start the machine again
To activate the Child Lock:
* Press and hold 2nd auxiliary
function button for 3 seconds. "Child
Lock On" appears on the screen after
"3_2_1" countdown in the programme
selection screen on the panel.
Release 2nd Auxiliary Function button
when this warning is displayed.
To deactivate the Child Lock:
* Press and hold 2nd auxiliary function
button for 3 seconds. "Child Lock
On" disappears from the screen after
"3_2_1" countdown in the programme
selection screen on the panel.
• AntiCrease+
This function is selected when the
3rd auxiliary function is pressed
and held for 3 seconds and the
programme follow-up light for the
relevant step turns on. When the
function is selected, the drum rotates
for up to 8 hours for preventing the
laundry from creasing at the end of
the programme. You can cancel the
programme and take your laundry
out at any time during the 8-hour
duration. Press the function selection
key or the machine on/off key to
cancel the function. The programme
follow-up light will remain on until
the function is canceled or the step
is complete. If the function is not
cancelled, it will be active in the
subsequent washing cycles as well.

End Time

With the End Time function, the
startup of the programme may
be delayed up to 24 hours. After
pressing End Time button, the
programme's estimated ending
time is displayed. If the End Time
is adjusted, End Time indicator is
illuminated.