Publicidad
Idiomas disponibles
Idiomas disponibles
PRECAUTION:
1.Communication function is only supported on some models ( code: 62959-62962).
2. Do not insert the plug of communication cable into torque wrench that does not support
communication function.
CONNECTING COMMUNICATION CABLE
Install in the PC the software for data adquisition, RS232 Uploader. The software is include in
the CD.
Turn off power and then connect the accesory cable between the RS232 COM port of PC and
torque wrench.
UPLOADING RECORD DATA
Make sure the connection between PC and wrench is normal..
Press
Change the wrench operation mode to
Value Review" section)
Use PC to start the uploader program. (Open application as administrator).
In uploader program, first select the correct COM port No.
Next, select the file path to save the uploaded data.
Finally, press "upload" button to transmit the torque records to PC.
The uploaded data is then shown on the column and saved in the *.csv file. Use Microsoft
Exce to view *.csv file.
32
COMMUNICATION
together to reset the wrench.
. (Please refer to "Peak Hold Mode Recorded
Publicidad
