Connections - Sharp PN-V600 Manual De Instrucciones

Ocultar thumbs Ver también para PN-V600:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 19
When the PN-ZB02 (optional)
is attached
8
9
10
11
12
13
14
16
15
Caution
• Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/disconnecting
cables. Also, read the manual of the equipment to be connected.
• Be careful not to confuse the input terminal with the output terminal when connecting cables. Accidentally reversing cables
connected to the input and output terminals may cause malfunctions and the other problems.
TIPS
• Set the audio input terminal used for each input mode in AUDIO SELECT on the OPTION menu. The factory settings are
shown below.
Input mode
PC D-SUB, PC DVI-D, PC RGB
AV DVI-D
AV COMPONENT,
AV S-VIDEO, AV VIDEO
PC HDMI, AV HDMI
• When connecting the external speaker, attach the speaker cable core (included in the optional PN-ZB02).
• HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing
LLC.
Multiple monitor connection
[Example]
Remote control sensor box
(Supplied with the PN-ZR01 (optional))
Second monitor
First monitor
Secondary
Primary
(Expansion unit)
(Main unit)
ID No.: 2
ID No.: 1
Third monitor
Fourth monitor
Secondary
Secondary
(Expansion unit)
(Expansion unit)
ID No.: 3
ID No.: 4
* Always install the remote control sensor box on the primary
monitor.
■ Connection with video cable
May vary depending on the system being used.
If using the PC/AV DVI-D terminal, up to 5 monitors can be
connected in a daisy chain. (When the PN-ZB02 is attached)
All manuals and user guides at all-guides.com

Connections

17
1
2 3 4 5
7
6
Audio input terminal (Factory setting)
Audio input terminal
Audio1 input terminal
Audio2 input terminal
PC/AV HDMI input terminal
1. PC/AV HDMI input terminal
2. PC D-sub input terminal
3. Audio input terminal
4. Audio output terminals
5. RS-232C output terminal
6. RS-232C input terminal
7. Control kit terminal
8. PC/AV DVI-D input terminal
18
19
9. PC/AV DVI-D output terminal
10. LAN terminal
11. External speaker terminals
12. Audio1 input terminals
13. Audio2 input terminals
14. PC RGB input terminals
20
15. AV component input terminals
16. AV video input terminal
For power
17. AV S-video input terminal
outlet
18. AC input terminal
19. Main power switch
20. Power cord (Supplied)
First monitor
PC/AV DVI-D
PC/AV DVI-D
input terminal
output terminal
To PC digital RGB output terminal
Second monitor
PC/AV DVI-D
input terminal
Digital signal (DVI) cables
(commercially available)
shows the
signal flow
5
E

Publicidad

Tabla de contenido
loading

Tabla de contenido