General Maintenance; The Engine; Guide Rail (Chain Pruner); Chain Maintenance - Trueshopping MT260 Manual Del Usuario

• Now wrap the cord around the inside of
the head until you are left with approx.
15cm of spare cord.
•
Feed the remaining two loose cord ends
back into the metal holes ensuring you
firmly pull it through each side
• Now reassemble the head and the refilled
unit is ready to be used.

General Maintenance

The engine

Please check the following regularly to ensure
optimum performance –
•
The air filter
•
The spark plug
• The starter cord for damage or fraying
! Always switch the unit off before
maintenance or repair!

Guide rail (Chain pruner)

•
Turn the guide rail over every time
you replace the chain, this will
prevent wear to just one side of the
rail.

Chain maintenance

A properly sharpened chain should go easily
through small branches / pieces of wood .
Don't work with a dulled or damaged chain as
it will increase the physical exertion required
to cut and may cause injury / damage to the
machine .
•
Keep the chain clean and free of
debris between uses.
•
Check the chain for cracks and
damaged rivets.
30