EASYHOME 809A Fox Manual Del Usuario página 11

8. Place mist lid on top of water tank and turn mist lid to face desired direction
of the mist.
9. Plug the power supply cord into a wall outlet. The power indicator light will
illuminate in green indicating that there is enough water in the humidifier
base and mist will begin emitting through the mist lid.
Note: After 10 seconds, the indicator light will turn off, but the humidifier will
continue to run.
•
Press the on/off button to start the unit (at LOW Mist)
•
Press again to change to MEDIUM Mist
•
Press again to change to HIGH Mist
•
Press and hold the on/off button (About 2 – 3 seconds) to turn on the LED
light (Light will rotate colors).
•
Press and hold the on/off button (About 2 – 3 seconds) again to choose
the color of LED light you desire.
•
Press and hold the on/off button (About 2 – 3 seconds) again to turn off
LED light.
10. Adjust the mist output so the mist rises up to be absorbed by the room air. If
mist drops quickly, use the lower output setting so the mist is rising up.
NOTE:
As a safety feature, when the humidifier runs out of water, the power
indicator light will turn red and the mist output will stop. This is preventing the
humidifier from possibly overheating and damaging the nebulizer. Turn the
humidifier off and unplug the unit before removing and refilling the water tank.
When emptying the base, be sure to pour away from the fan outlet.
How to use the vapor tray and essential oils
•
Remove the water tank. Place a vapor pad into
the vapor tray. Replace the water tank before
running the humidifier.
•
Essential oils may be added to the water tank.
After filling the tank, use the desired number of
drops to obtain the desired amount of scent.
Note: Essential oils vary by brand
IMPORTANT: NEVER add medication, additives, salt or vapor pad to the water
tank. ONLY essential oils can be added directly into the water tank.
User instructions
11