Maintenance & Care - Price Pfister Wakely 34 Serie Manual Del Usuario

12
12 UNIT START UP
Turn on hot and cold water supplies, and check for leaks above and below the sink.
Note: After installation is complete, flush faucet (see step 16).
FAUCET FUNCTIONS
13
13 VALVE FUNCTION
By lifting the Lever Handle (13A) up, the valve will be activated allowing water to flow.
The water flow will increase by continuing to lift up the Lever Handle (13A). By rotating
the Lever Handle counter-clockwise, the water temperature will decrease to cold flow
only. By rotating the Lever Handle clockwise, the water temperature will increased to
hot flow only.
14
14 SPOUT FUNCTION
The Spout (14A) can be rotated around the Faucet Body in any direction.
ON
13A
HOT
13A
COLD
14A
ENGLISH
15
15 SIDE SPRAY OPERATION
The Side Spray (15A) can be pulled forward to spray water in any direction. To activate the
Side Spray, press the Toggle Button (15B) located on the back of the Side Spray (15A).
16
16A
16E
16D
16C
16 FLUSHING & AERATOR CLEANING
After installation is complete, remove Aerator Housing (16A). Turn Valve (16B) on
and allow both hot and cold water to run for at least one minute each. While water is
running, check for leaks. To clean the aerator, disassemble Aerator Housing (16A) by
separating the Aerator Shell (16C), Basket (16D), and Washer (16E). Once parts have
been cleaned, reassemble by reversing steps.
MAINTENANCE & CARE
17
17 HANDLE REMOVAL
Turn off water before proceeding! With valves in closed position, detach Decorative Button
(17A), unscrew Fastener (17B), and remove Handle Hub (17C) from Valve Stem (17D).
4
15B
15A
17A
17B
17C
17D
16B