Operation; Tools, Measurement- And Test-Equipment; Changing Stylus - Hexagon IRP40.02 Instrucciones De Operación

IRP40.02
2

Operation

2.1

Tools, Measurement- and Test-Equipment

Order No. Description
0885 Mounting pin
1097 Hexagon key AF2 mm
1346 Hexagon key AF2.5 mm
3489 Hexagon key AF4 mm
5840 Mounting tool for service cover and battery cover
3079 Dial gauge
Tool Box
1x Mounting pin (0885)
40.02-TB
2x Hexagon key AF2 mm (1097)
1x Hexagon key AF2.5 mm (1346)
1x Mounting tool for service cover and battery cover (5840)
2.2

Changing Stylus

1. Unscrew the stylus from the touch probe using the mounting pin.
2. Carefully screw the new stylus into the touch probe (Fig. 6).
3. Align the stylus to spindle center (refer to chapter 2.5).
4. Calibrate the probe.
Fig. 6 Stylus change
Illustration
Not illustrated
m&h Infrared touch probe
IRP40.02
Stylus
Operation
Mounting pin
(0885)
M=2 Nm (1.47 lbf.ft)
39