Easy Home WF-008R Manual Del Usuario página 11

Table or Floor Use
1. If using this fan on a hard floor or table, lay the fan gently on the floor or
stable surface, take the feet (#6) and carefully snap them into each groove on
the bottom of the fan. The small hole in the foot should go in the back. Insert
the screw from the bottom of the feet up into the fan housing and secure the
feet by tightening the screws (provided) using a Phillips head screwdriver.
NOTE: FEET NEEDED ONLY IF USING ON A HARD FLOOR OR ON A TABLE. DO NOT
ATTACH FEET IF PLACING THIS UNIT IN A WINDOW.
IT IS NOT RECOMMENDED TO USE THE FAN ON CARPETING.
Remote control functions
The remote control mirrors the functions of the control panel.
1. Power button - ON/OFF (LOW)
2. Speed – choose LOW, MED, HIGH
3. Function button - Cool, Exhaust, Circulate
Remote battery replacement
Remove the battery cover on the back of the remote. Insert 2 AAA
batteries, ensuring the polarities are correctly aligned. Replace battery
cover before use.
User instructions
11