Casals VMP800M Manual Del Usuario página 4

- Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting the power source and/or
battery pack, picking up or carrying the
tool. Carrying power tools with your finger
on the switch or energizing power tools that
have the switch on invites accidents
- Remove any adjusting key or wrench
before turning the power tool on. A
wrench or a key left attached to a rotating
part of the power tool may result in personal
injury
- Do not overreach. Keep proper
footing and balance at all times. This
enables better control of the power tool in
unexpected situations
- Dress properly. Do not wear loose
clothing or jewellery. Keep your hair and
clothing away from moving parts. Loose
clothes, jewellery or long hair can be caught
in moving parts.
- If devices are provided for the
connection of dust extraction and
collection facilities, ensure these are
connected and properly used. Use of
dust collection can reduce dust-related
hazards.
- Do not let familiarity gained from
frequent use of tools allow you to
become complacent and ignore tool
safety principles. A careless action can
cause severe injury within a fraction of a
second.
Power tool use and care
-Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job
better and safer at the rate for which it was
designed
4
-Do not use the power tool if the switch
does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired
-Disconnect the plug from the power
source and/or battery pack, if detachable,
from the power tool before making any
adjustments, changing
or storing power tools. Such preventive
safety measures reduce the risk of starting
the power tool accidentally
-Store idle power tool out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users
-Maintain power tools and accessories.
Check for misalignment or binding of
moving parts, breakage of parts and
any other condition that may affect the
power tool's operation. If damaged, have
the power tool repaired before use. Many
accidents are caused by poorly maintained
power tools
-Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control
-Use the power tool, accessories and
tool bits etc in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
- Keep handles and grasping surfaces
dry, clean and free from oil and grease.
Slippery handles and grasping surfaces do
not allow for safe handling and control of
the tool in unexpected situations
Serv
-Hav
a q
iden
ensu
main
accessories, Ham
-Wea
can
-Use
the t
injur
-Hol
surf
whe
hidd
acce
mak
"live"
shoc
- Use
wear
Add
-Do
appl
-CAU
do n
-Ens
beco
drap
risk o
- Do
is da
- En
ratin
befo
- Co
supp