Casals VMP800M Manual Del Usuario página 5

witch Service
-Have your power tool serviced by
tool
a qualified repair person using only
ch is
identical replacement parts.
ower
ensure that the safety of the power tool is
able,
maintained
any
ries, Hammer safety warnings
-Wear ear protectors. Exposure to noise
ntive
rting can cause hearing loss.
-Use auxiliary handle(s), if supplied with
each the tool. Loss of control can cause personal
sons
injury.
hese -Hold power tool by insulated gripping
tool. surfaces, when performing an operation
where the cutting accessory may contact
ds of
hidden wiring or its own cord. Cutting
ries.
accessory contacting a "live" wire may
g of
make exposed metal parts of the power tool
and
"live" and could give the operator an electric
the
shock.
have - Use personal protective equipment. Always
wear dust mask
Many
ined
Additional safety warnings
ean. -Do not place inflammable material near the
appliance.
harp
-CAUTION: In order to prevent overheating
d are
do not cover the appliance.
and -Ensure that neither the air access nor exit
hese become either totally or partially covered by
the drapery, clothing, etc., as this increases the
k to risk of fire.
- Do not use the appliance if the cable or plug
l for
is damaged.
nded
- Ensure that the voltage indicated on the
aces rating label matches the mains voltage
ase. before plugging in the appliance.
s do
- Connect the appliance to a socket that can
ol of
supply a minimum of 10 amperes.
- Only use the appliance with the specific
electric connector provided.
- If any of the appliance casings breaks,
immediately disconnect the appliance from
This will
the mains to prevent the possibility of an
electric shock.
- Do not use the appliance if it has fallen on
the floor, if there are visible signs of damage
or if it has a leak.
- CAUTION: Maintain the appliance dry.
- CAUTION: Do not use the appliance near
water.
- Do not use the appliance with damp hands
or feet, or when barefooted.
- Do not wrap the power cord around the
appliance.
- Do not clip or crease the power cord.
- Check the state of the power cord.
Damaged or tangled cables increase the risk
of electric shock.
- Do not touch the plug with wet hands.
- Do not touch any of the appliance's moving
parts while it is operating.
- Fully unroll the appliance's power cable
before each use.
- Check the position of power cables before
commencing work ensuring they are well
away from the work area.
- Keep hands and other body parts well away
from the work area whist the tool is in use.
- Do not use the appliance if its accessories
are not properly fitted.
- Do not use the appliance if the parts or
accessories are not properly fitted.
- Do not use the appliance if the accessories
or consumables attached to it are defective.
Replace them immediately.
- Use the appliance handle/s, to catch it or
move it.
- Unplug the appliance from the mains
before replacing any accessory.
5