Repairs - INQUA Inhalator Instrucciones De Uso

Figure 5

Repairs

NOTICE:
If the compressor is
opened without
authorisation, all
guarantees and claims
under the warranty will
be null and void.
44
To do this, proceed as follows:
6
11
6 Air filter
11 Removal tool

Place the removal tool (11) supplied with the replacement filter
firmly on the filter (6) in the compressor.

Turn the removal tool until you can pull the old filter out of the
compressor.

Pull the old filter out of the removal tool and dispose of it.

Push the new filter as far as it will go into the compressor filter
seating.
CAUTION: Damage to the compressor or impaired treatment
caused by unsuitable air filter
Using an air filter made by a different manufacturer may damage the
compressor or impair the effect of the inhalation treatment.

Use only air filters that are recommended by INQUA for use with
®
the INQUA Inhalator.
Replacing the nebuliser
Note the information regarding material resistance and replaceabil-
ity in the instructions for use of the nebuliser.
Repairs must not be carried out on the INQUA
the manufacturer. If the compressor needs to be repaired, contact
the manufacturer or your sales partner (see back of instructions for
use).
6
®
Inhalator except by