Quantum R-net Instrucciones Básicas De Funcionamiento página 13

3. Push the joystick up or down to select an option. Once the option is
selected, push the joystick left or right to either toggle an option on
and off or to access option setting screens, depending on the option.
4. When accessing option setting screens, once the desired function is
highlighted on the screen, push the joystick to the right to select that
function.
5. To return to the previous screen, push the joystick up or down to
select Exit and then push the joystick to the left to return to the
previous screen.
Figure 2. Main Menu Screen
To set the time:
1. Push the on/off button to power on the chair and the controller.
2. Push and hold the speed increase and speed decrease buttons
simultaneously to display the Main Menu Screen. See figure 2.
3. Push the joystick up or down to highlight the Set Time option, then push
the joystick right or left to select that function.
4. Push the joystick left or right to select the desired option, then push the
joystick up or down to make the desired changes.
5. Once all changes have been made, push the joystick left or right to
select Exit and then push the joystick up or down to return to the
drive screen.
To reset the tripmeter:
1. Push the on/off button to power on the chair and the controller.
2. Push and hold the speed increase and speed decrease buttons
simultaneously to display the Main Menu screen. See figure 2.
3. Push the joystick up or down to select the Distance option, then push
the joystick right or left to display the distance settings. See figure 3.
4. Push the joystick up or down to highlight the Clear Trip Distance
option, then push the joystick right to select that function.
Figure 3. Menu Screens
13