3-Pin Off-Board Charger/Programming Socket; Locking/Unlocking The R-Net - Quantum R-net Instrucciones Básicas De Funcionamiento

14
5. Once all changes have been made, push the joystick up or down to
select Exit and then push the joystick right or left to return to the
previous screen. Repeat this step to exit screens until you reach the
drive screen.

3-pin Off-board Charger/Programming Socket

You may use an off-board charger to charge your power chair batteries
through the 3-pin socket located on the front of the R-net. If you use an
off-board charger, the charger current should not exceed 8 amps. Contact
your Pride/Quantum Rehab Provider for more information.
WARNING! Only chargers with Neutrik NC3MX
plugs should be connected to the off-board
charger/programming socket. See your Pride/
Quantum Rehab Provider for more information.
NOTE: The socket may also be used for reprogramming the R-net. Contact
an Pride/Quantum Rehab Provider for more information.

Locking/Unlocking the R-Net

The R-net has a feature that enables you to lock your power chair to
prevent unauthorized use.
To lock the R-net:
1. With the R-net powered on, press and hold the on/off button. After
one (1) second, the R-net should beep.
2. Release the on/off button.
3. Push the joystick to the full forward position until the R-net beeps.
4. Pull the joystick to the full rearward position until the R-net beeps.
5. Release the joystick. There should be a long beep.
6. The R-net is now locked.
To unlock the R-net:
1. Press the on/off button and power on the R-net.
2. Push the joystick to the full forward position until the R-net beeps.
3. Pull the joystick to the full rearward position until the R-net beeps.
4. Release the joystick. There should be a long beep.
5. The R-net is now unlocked.
NOTE: If the above procedure fails to either lock or unlock the R-net,
contact your Pride/Quantum Rehab Provider.