Sleep Mode; Thermal Rollback; Fault Codes - Quantum R-net Instrucciones Básicas De Funcionamiento

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 84
16

SLEEP MODE

The R-net Controller has a sleep mode feature. Sleep mode is a built-in
circuit that automatically shuts off the main power if the joystick is not
moved in any direction for a period of time predetermined by controller
program. The battery condition meter lights on the keypad indicate sleep
mode by blinking once every five seconds. To restore power and
continue, push the on/off button twice.

THERMAL ROLLBACK

The R-net Controller is equipped with a thermal rollback circuit. This
circuit monitors the temperature of the controller, which roughly
translates to motor temperature. In the event that the R-net controller
becomes excessively hot, motor current (amperage) is reduced. For
every degree above normal temperature, the motor current limit is
reduced proportionally. This reduces "power," which could also reduce
power chair speed. Once the R-net Controller reaches its temperature
limit, the current output is reduced to zero and your power chair will
stop. This allows the electrical components and motors to cool down.
When the temperature returns to a safe level, your power chair resumes
its normal operation.

FAULT CODES

The R-net Controller is designed with the user's safety as the prime
consideration. It incorporates many sophisticated self-test features
which search for potential problems at a rate of 100 times per second. If
the R-net detects a problem either in its own circuits or in the power
chair's electrical system, it may decide to stop the power chair,
depending on the severity of the problem. The R-net is designed to
maximize the user's safety under all normal conditions. The following
table identifies the individual fault codes. Fault codes are displayed as a
rapid flashing of the lights. If you encounter one of these fault codes or
experience any other problems with your power chair, turn your
controller off and then on again. If the problem persists, contact a Pride/
Quantum Rehab Provider.

Publicidad

Tabla de contenido
loading

Tabla de contenido