Fora G31 Manual Del Usuario página 15

If you do not want to set an alarm, press SET to skip this step.
If you want to turn off an alarm, find the alarm number by pressing
SET in the setting mode, press
At the time of your alarm, the meter will beep and automatically turn
on. You can press
begin testing. If you do not press
utes then switch off. If you do not want to test at this time, press
to switch off the meter.
Congratulations! You have completed all settings!
• These parameters can ONLY be changed in the setting mode.
• If the meter is idle for 3 minutes during the setting mode, it will switch off
automatically.
to change from " ON " to " OFF " .
to silence the alarm and insert a test strip to
NOTE
, the meter will beep for 2 min-
15