Fora G31 Manual Del Usuario página 18

Step 2
Press to Mark this Test as a Control Solution Test.
If you press
longer a control solution test.
Step 3
Apply Control Solution.
Shake the control solution vial thoroughly before
use. Squeeze out a drop and wipe it off, then
squeeze another drop and place it on the tip of
the vial cap.
Hold the meter to move the absorbent hole of
test strip to touch the drop. Once the confirma-
tion window fills completely, the meter will begin
counting down.
To avoid contaminating the control
solution, do not directly apply
control solution onto a strip.
18
again, the " QC " will disappear and this test is no